Free tool
UTM link builder for your Google Business Profile
Enter your website address and this tool adds tracking tags to the links on your Google profile: the website button, booking or appointment link, menu link and post buttons. Once those tagged links are in place, Google Analytics 4 can show how many visitors each one sends you and what they did next, instead of mixing them in with everyone who found you through ordinary Google search.
How visible is your business on Google Maps and in AI answers?
See where you rank on Google Maps, how your reviews compare with nearby competitors and whether ChatGPT and Google’s AI recommend you. Free, emailed to you in about 10 minutes, with no obligation.
Your tagged links
Finding these visits in Google Analytics 4
- Open Reports, then Acquisition, then Traffic acquisition.
- Change the first column of the table to “Session campaign” to see each campaign name, such as gbp-website, as its own row.
- Or choose “Session source / medium” to see them under google / organic, alongside other organic visits.
Visits only appear once someone has clicked the new link, so check back a day or two after you’ve updated the profile.
Runs entirely in your browser and nothing is sent to us. Your website address is remembered in this browser only, so it’s there next time; “Clear” forgets it.
How to use it
Tagged profile links in five steps
It takes a couple of minutes, plus a few more to paste the links into your profile.
01
Enter your website address
Type or paste the page your profile should open, normally your home page. You can leave off the https:// and the tool adds it for you.
02
Tick the links your profile has
Everyone has a website link. Tick booking, menu or posts only if you use them, and add a separate page address if your booking or menu page isn’t the home page.
03
Check the tag values
The suggested values are google, organic and a campaign name per link, such as gbp-menu. Change a campaign name if you want to, but keep it short, lower case and the same from then on.
04
Copy each link into your profile
Use the Copy button next to each link, or “Copy all links” to keep a note of them. Each result says where in the profile it belongs.
05
Test, then check GA4 later
Press “Open” to check every link loads the right page. After a few days, look in GA4’s Traffic acquisition report to see the visits.
Where to use it
Where each tagged link goes in your profile
Which links you can add depends on your business category, so you may not see every option below. Tag the ones you have.
The website link
Open your profile, choose Edit profile, then Contact, and edit the Website field. Google’s own steps are in its help article on adding your business website. This is the link most people click, so tag it first.
Booking and appointment links
Salons, clinics, gyms, driving instructors and other businesses that take bookings may be able to add a booking link. Google explains which categories get these links, and how to add them, in managing your local business links.
The menu link
Restaurants, cafés, pubs and takeaways can point the menu link at the menu page on their own site. Tag it with gbp-menu and you’ll see how many people read the menu before deciding to visit.
Buttons on your posts
When you add an update or offer, you can give it a button that links to a page. Google covers this in its help on creating posts on your Business Profile. Use a different campaign name, such as gbp-posts-spring-offer, to track a single post.
Finding the visits in GA4
In Google Analytics 4, go to Reports, then Acquisition, then Traffic acquisition. Switch the table to “Session campaign” to see each gbp- name, or “Session source / medium” for the google / organic total.
Links to leave untagged
Don’t add tags to links between pages on your own website, or to phone numbers and directions. They only belong on links that start somewhere else, like your profile, and point at your site.
Why it matters
See what your profile actually sends you
Without tags, someone who taps the website button on your profile usually turns up in GA4 as google / organic, exactly like a visitor who clicked an ordinary search result. That makes it hard to tell whether work on your profile, such as new photos, posts or reviews, is bringing more people to your website, or whether they go on to call, book or send an enquiry.
Tagging doesn’t change who visits. It changes how the visits are labelled, so you can pick out profile traffic and compare its enquiries and bookings with the rest of your site. Our guide on measuring local SEO results explains which figures are worth tracking each month.
The Performance report inside your profile keeps counting website clicks either way, and it’s worth reading alongside GA4: the two will rarely give the same number, because one counts clicks and the other counts visits that loaded your page. Our article on reading your profile’s performance insights goes through what each figure means.
Questions
UTM tags on your Google profile: common questions
What are UTM tags?
They’re extra parameters added to the end of a web address, such as utm_source=google&utm_medium=organic&utm_campaign=gbp-website. Visitors still land on the same page. Your analytics reads the tags and records where the visit came from, so you can group those visits together in reports.
Why use google and organic rather than something like “gbp”?
Profile visits really do come from Google’s free listings, so keeping the source as google and the medium as organic leaves them in GA4’s organic search channel, where they would sit anyway. The campaign name, such as gbp-website, is what separates them. Some people prefer their own values; that’s fine, as long as you use them consistently. You can change both in the tool.
Will adding tags affect my ranking on Google Maps?
There’s no reason to expect it to. The tags only change how your own analytics labels the visit, and the page people reach is the same. Do test each link after saving, though, because a few website builders and booking systems handle unfamiliar parameters badly.
My website address already has a ? or a # in it. Is that a problem?
No. The tool keeps any parameters you already have, puts the tags after them, and keeps the # part at the very end where browsers expect it. If the address already has utm_ tags from an earlier attempt, they’re replaced rather than added twice.
Why don’t my GA4 numbers match the clicks in my profile?
They measure different things. Google’s Performance report counts clicks on the website link, while GA4 counts visits that loaded your page with its tracking working. Visitors who leave before the page loads, or who decline analytics cookies, appear in one and not the other. Use each to watch the trend over time rather than expecting them to agree.
Does the tool keep or send my website address?
Nothing is sent to Grow With SEO or anyone else; the links are built in your browser. To save you typing it again, the last website address you entered is kept in this browser’s own storage on your device. Press “Clear” in the tool to remove it.
Tracking shows what your profile sends you. Want to know how it compares with nearby competitors?
See where you rank on Google Maps, how your reviews compare with nearby competitors and whether ChatGPT and Google’s AI recommend you. Free, emailed to you in about 10 minutes, with no obligation.
More free tools